| 设为主页 | 保存桌面 | 手机版 | 二维码
普通会员

上海凯贤印刷科技有限公司(生产部)

PP免处理油墨-自干金属油墨-免烘烤金属油墨-电镀五金油墨-塑胶电镀油墨-阳极氧化铝...

产品分类
  • 暂无分类
站内搜索
 
友情链接
  • 暂无链接
您当前的位置:首页 » 供应产品 » 移印PET油墨系列-上海PET移印油墨-PET油墨
移印PET油墨系列-上海PET移印油墨-PET油墨
点击图片查看原图
产品: 浏览次数:120移印PET油墨系列-上海PET移印油墨-PET油墨 
品牌: 欧莱斯
单价: 220.00元/KG
最小起订量: 1 KG
供货总量: 1000000 KG
发货期限: 自买家付款之日起 2 天内发货
有效期至: 长期有效
最后更新: 2022-07-25
  询价
详细信息

  • PP系列油墨 油墨特性:拥有和德国彩丽宝一样的颜色,主要用于PP、PE、BOPP等材料上,具有高色泽、高色彩、高遮盖力、高稳定性、耐酒精及耐磨擦之特点。 印刷:丝印移印均可。 表干及实干时间:表干时间自然挥发5-10分钟;实干时间在24小时以内。 稀释及清洗:SV3慢干开油水、UVK1(移印开油水)同时可使用718洗网水清洗。 测试方法(完全干燥后): 1、3m胶纸粘在画有百格的油墨表面,45度角迅速拉起不脱油; 2、纯度99%的工业酒精,一千克砝码用棉布包住在油墨表面,以水平力来回拉200次无脱色; 3、 耐磨:橡皮擦500g力水平来回擦500次。 使用方法: 1、使用前应充分搅拌,用后随时封闭; 2、搅拌时加开油水10-15%,稀释到印刷粘度; 3、网板塞网时可用洗网水清洗; 4、不得与其它类型油墨混合使用。 注意事项: 1、塑胶材料的外观相似,但可能会是不同的材料,客户需试印确定其符合要求后,再批量印刷; 2、在移印过程中,如出现拉丝或散开,可适当加入一些慢干膏即可; 3、环境温度过高,将会影响油墨原有质量; 4、根据气候变化,请远离火源,阴暗环境下存放 PP series ink characteristics: has the same color and Germany Cai Li Po, mainly for PP, PE, BOPP and other materials, with a high color, high color, high covering power, high stability, high alcohol and wear resistance characteristics. Printing: screen printing can be. Surface dry and hard work time: surface dry time natural volatile5-10 minutes; work time within 24 hours. Dilution and cleaning: SV3slow dry open water, UVK1( printing open water) can be simultaneously used718washing network water cleaning. Test method ( completely dry ):1,3M gummed paper in painting has hundred grid ink surface,45degree angle quickly pulled off oil;2,99% of the purity of industrial alcohol, one kilogram of weight of cotton pack in the surface of ink, to the level of force pulling back and forth200 times without decolorization;3, wear-resistant: eraser500g force level brush back and forth 500times. Usage: 1, use should be fully stirred, use at any time after the closure;2, add water mixing10-15%, diluted to printing viscosity;3, mesh plug mesh can be used when washing network water cleaning;4, not with other types of ink mixed use. Note: 1, the plastic material similar in appearance, but may be of different materials, customers need to try to determine its requirements, and then a batch printing;2, in the printing process, such as drawing or spread out, may be appropriate to add some slow dry plaster;3, the ambient temperature is too high, will affect the ink the original quality;4, according to the climate change, please stay away from fire, dark environment storage
询价单
0条  相关评论